February 25 (Sunday)
at 10:30 am
Class length
90 minutes
Location
Laser Room and Classroom
Description: With our introductory class you learn to use the laser on flat stock; in this class you learn to engrave on cylindrical stock. Using our rotary attachment you'll be able to etch on glasses, bats, mugs, and more. This class certifies you to safely use this new laser accessory.
Building on your prior laser knowledge you'll learn how to: 1) set up the laser for rotary etching, 2) safely mount the rotary accessory on the machine bed, 3) align the device to the X-axis, 4) properly mount your stock, 5) safely focus the laser, 6) prepare your design in Lightburn 7) execute the job and 8) correctly reset the laser for flat stock. The fundamentals of laser etching don't change but to correctly use our rotary and to get good results requires special training.
Level: Intermediate
Prerequisites: Age 18+; Laser Re-Certified
Format: 1 session, 1.5 hours
Cost: $60 and $35 SDFWA Membership
Full refunds for cancelations more than 14 days in advance or if class is cancelled; 50% refunds for cancelations more than 7 days in advance; No refunds for cancelations less than 7 days in advance or for failure to appear.
Sorry - that class has already taken place!